Detailed introduction

1. Fully automatic filters occupy much less space than traditional filters or other mechanical filters, and can be arranged at the corners as needed. The equipment has a small self weight and no special requirements for the foundation. It only needs to be kept level. If the foundation is difficult to meet the horizontal requirements, the equipment can be fixed with feet. Small systems can be directly installed on pipelines, while large and medium-sized systems use anchor connections, and their height can be adjusted according to on-site conditions.

2. The inlet, outlet, and drainage pipes of the filter system are all connected with standard flanges

▲ Equipment characteristics

1. Fully automatic lamination ● Automatic lamination backwash filter

The filter system adopts groove type filter plates as the core components of the filter, all of which meet international standards. Filtering can target different types of suspended impurities, and particles are effective.

The interchangeability of each filtering unit core and interface in the fully automatic stacked filter system ensures the diversity of filter combinations. Users can choose according to their needs and be flexible to meet your usage requirements, resulting in a compact system.

3. The backwash unit of the fully automatic stacked filter system can be completed within 20-30 seconds. Generally, the backwash water consumption is less than 0.5% of the filtered water (50L-100L single filter unit backwash water consumption), and it can also achieve flushing for viscous impurities, with a wider range of applications.

4. The fully automatic stacked filter system automatically utilizes the filtered water from other filtering units for rinsing. Due to its low water consumption, it has no significant impact on the water output of the equipment.

5. The filtration and backwashing system of the system are carried out simultaneously, and the pressure loss and flow loss caused by automatic maintenance of the system are small. Take turns backwashing one by one, while others work normally. This improves the efficiency of the system's work.

6. Accurate filtration: Different precision filter discs can be selected according to water requirements, with 20 available μ、 fifty μ、 one hundred μ、 one hundred and thirty μ、 two hundred μ、 four hundred μ Waiting for various specifications.

▲ Equipment working principle

Stacking is a carrier for impurity treatment, which is composed of a group of plastic discs with double-sided grooves in different directions stacked together. The edges of the grooves on adjacent surfaces form numerous intersections, which form a large number of cavities and irregular pathways that continuously shrink from the outside to the inside. When filtering, these pathways cause turbulence in the water, ultimately leading to the interception of impurities in the water at various intersections.